506 – OneNote 2016 reprieve

Posted on December 2, 2019 by ewand

OneNote is, for a lot of fans, the best application that Microsoft makes, especially in an educational setting. About 18 months ago, it was announced that the venerable and extensible (especially if you’re a OneTastic / OneCalendar user) desktop version was being put out to pasture, in favour of the more modern, erm, Modern version.

Office 2019 was no longer going to ship with OneNote – the desktop app was not being developed beyond OneNote 2016, but it would still be freely installable if desired.

Efforts would be focussed on the Modern / Store / “OneNote for Windows 10”, which shares a lineage with the mobile apps; there’s a lot to be said in favour of this strategy, since it would bring the UX of the Windows Store, tablet, phone and web apps into alignment. For regular ToW readers, this has been covered ad nauseam.

Well, blow me down, a brilliant Ignite session from @Ben Hodes only went and wound the clock back (and simultaneously painted it forward)… [Check out Union Jack Man at 42:18 in the video stream if you want a laugh]

OneNote 2016 is getting some CPR, and will be installed by default with clean Office setups again, early in 2020.

Point of clarity – a clean Office2019 / Office 365 install doesn’t currently include OneNote 2016 … but upgrading from an existing Office install that already had OneNote, does. If need be, go to http://aka.ms/installonenote to install OneNote 2016.

Some new features are coming, too – like Dark Mode, @mentions, To Do integration and more. The OneNote for Windows 10 code base is being back-ported to the older Win32 version; in time, the same underlying code will exist, even if there remains two versions of the product. It was previously reported that across the Office suite on Windows, the Win32 codebase will be favoured going forward, even though Modern versions were released for several of the traditional apps. We will have to wait and see.

Of course, lots of functionality exists in common between the two current versions of OneNote, even if the level of detail and the way to invoke and use it is a little different – take Record Audio, for example.

Did you know that if you insert an audio recording into your OneNote page, that any handwritten or typed notes you take while the recording is underway, will be linked to the corresponding place in the audio?

Later, if you click on a block of text or handwriting, you can play back the recording at just that point, or if you just start playing the audio, the notes you took will be highlighted as the playback progresses.

In OneNote 2016, you can also have the application index the contents of audio recordings, looking for keywords. Enable it at File > Options > Audio & Video.

No such function appears to exist in the OneNote for Windows 10 app; maybe that’s a good thing. After all, OneNote 2016 only lets you turn it on after an ominous-sounding warning…

Tip o’ the Week 496 – Dark Mode marches on

Posted on September 13, 2019 by ewand

Back in the olden days of computing, wage slaves sat in front of terminals with black backgrounds and lurid green text writing. The advent of the graphical user interface relieved this tyranny with a paper-white background from a bitmapped screen to write your WYSIWYG text, to showcase colourful graphics (and Fonts!).

Fast forward 30+ years and it seems every app and OS is running away from black text / white backgrounds, and heading for monochrome graphics and oppressive white text on a black background again.

Using Dark Mode, either in apps or in the operating system on your computer or phone, promises a variety of benefits – less noticeable flickering, reducing eye strain, avoiding bright lights in a dark environment, perhaps better readability and therefore productivity, and even lower energy costs.

Dark Mode has existed in Windows for a while – but ultimately, apps need to support the theme, too, and more and more are doing so – like new Edge browser, or Office apps (where you can set the Office Theme).

Microsoft recently put out a groovy video to highlight Dark Mode across a variety of apps and device types, and some commentary about why and when. It’s even come to Outlook.com as well.

The announcement on Microsoft 365 functionality adds for August 2019 highlighted additional Dark Mode support coming to Outlook mobile apps and Outlook.com, saying, “Dark Mode is not only easier on the eyes and may extend battery life, it also enables you to comfortably continue using your device in places where the default bright mode isn’t appropriate, like darkened airplanes and movie theaters.”

So kids, next time you want to go and watch a movie & catch up on your email, make sure you’ve Dark Mode on!

Tip o’ the Week 480 – Installing Apps in New Edge

Posted on May 31, 2019 by ewand

Whatever you call it – New Edge, Edge Dev, Edgemium, Chromdge etc – the new Windows browser called Edge but with its rendering gubbins based on Chromium is making progress with regular updates and has quite a following already.

ToW 476 covered some of the articles that were written when it first came out, but buried within was a slew of interesting features that merit their own mention.

Such a capability is being able to install a web page as an App, making it look a lot like a normal Windows app to some degree. In older Edge browser, this was known as pinning a site.

In New Edge, just go to the … menu (top right) on any web page, and under Apps, you can Manage apps and install pages.

If the current site is a regular web page, you’ll see “Install this site…” but if the page is itself a Progressive Web App (PWA), like the Starbucks example above, then it will likely declare its name. There are lots of PWAs out there already – see here as an example – some are managed through the Windows Store, but since Google allowed Chrome / Chromium to install PWAs, many are published online and available directly.

Users don’t even need to know what a PWA is, for the most part – if a site looks and feels like an app, then that’s what it is. Some publishers report dramatic improvements in using PWA when compared to more traditional iOS/Android or UWP apps – Tinder, for example, found the PWA was 90% smaller than the regular app.

It seems that when Tindering, size really does matter.

Tip o’ the Week 463 – Photographs, eh (he asked him knowingly)?

Posted on February 4, 2019 by ewand

Nudge Nudge! We’ve all taken photographs and wanted to manipulate them with better tools or on a better screen than presented by our smartphones, haven’t we? Pros might use Photoshop (and some less than Pro too), but for the mere mortals among us, the Photos app for Windows 10 can do a lot of the basics really well.

There are some simple but reasonable tips on getting more out of Photos here, and if you’re still missing Movie Maker, then you could do worse than check out Photos’ ability to edit videos, as discussed here.

There’s a recently-released beta extension for Windows which provides support for RAW images (well, some of them) – see more here.

If you already use Photos, have you noticed that when using a Modern App to manipulate files (eg inserting a photo into OneNote or Mail), then you’ll see Photos appear as a node in the file chooser dialog?

You get the ability to use some of the Photo app functionality for organising your pics – like using search, viewing by subject or use the Timeline feature to quickly jump to a picture based on the date it was taken.

In a rare departure from the mantra that modern apps are somehow inferior to proper ones, here’s an example where using a UWP app is demonstrably better than its Win32 counterpart.

See for yourself – when you’re used to the Photos app functionality and go back to a non-Modern app (like the zombie OneNote 2016 application that’s still a lot more functional in many ways than its UWP sibling), the file dialog box is shorn of Photos addenda and you’re back to grubbing about in the file system to find your files.

Tip o’ the Week 445 – Finding Modern App names

Posted on August 24, 2018 (Updated November 5, 2021) by ewand

As detailed in ToW #443, there are ways of running Modern Windows apps from a script, command line or maybe just from the WindowsKey+R Run prompt – so you don’t need to use the mouse or your finger to activate them.

If you’re looking for the shortcut name for your favourite app, there’s a somewhat lengthy process to find out what it is, but at least you only need to do it once…

Try the following:

Fire up PowerShell (press Start, type powershell then make sure you don’t go for the ISE unless you want to do some script authoring and debugging. In other words, if you don’t know why you would want to run PowerShell ISE, then just stick with PowerShell…)
From the PowerShell console, run get-appxpackage > $env:userprofile\apps.txt – this will grab the details of every installed modern app in turn, and pipe all of the text to a file
Press WindowsKey+R and run apps.txt to launch the file, and you’ll see an almost impenetrable wall of text (thousands of lines – in Notepad, go to the View menu and enable the Status Bar then press CTRL+END to jump to the very bottom, if you want to see just how many lines…)

Now, you might be able to figure out from the Name line in the text, which app the following details pertain to, but it’s not always obvious – take the Mail app, for example … if you have it pinned to the Start menu and then drag/drop it onto your desktop to create a shortcut, you can see the target (which is the same as the PackageFamilyName attribute in the text file) is a bit more opaque…
There are all sorts of ways you could dig around in the file system and/or the registry to find out what the shortcut name is to launch your chosen app, but perhaps the quickest is to copy/paste this text into a PowerShell console and hit enter:

foreach ($p in $(get-appxpackage)) { foreach ($n in (Get-AppxPackageManifest $p).package.applications.application.extensions.extension.protocol.name) { $p.packagefullname + “`t `t `t -=- ” + $n } }
This will display a list of all the packages and the “protocols” that each can support, in other words the direct commands you can run to invoke them (if you run that command and stick a “:” on the end). Some will be pretty useless, but others can be handy – like onenote-cmd: which launches the Modern OneNote without the annoying prompt you get if you just try onenote:
If you want to create a traditional (eg Desktop) shortcut to one of your fave apps, just right-click, New, Shortcut and enter the command, give it a name, and Robert’s your father’s brother.

You could use a variant of this approach to automatically launch Modern apps when Windows itself starts – from WindowsKey+R, enter shell:startup and drop (or create) your shortcut in there.

Tip o’ the Week 426 – You’ve been PWAned

Posted on April 13, 2018 by ewand

Both the Windows/Microsoft Store app marketplace and the kinds of apps it contains have had a number of generations, from phone apps (designed for Windows Phone), through Windows 8’s so-called “Metro” apps, to the later Universal Windows Platform apps ushered in by the Windows 10 platform. The goal of UWPs is to allow a single code-base to run on multiple Windows 10 based environments, such as tablet/PC, phone, HoloLens and Xbox One.

The inconvenient truth with the UWP model is that, for most people, apps are used primarily on their phone and on smaller tablet devices. With the demise of Windows Phone, and the tablet market consisting largely of cheap Android tabs, expensive iPads, and Windows “2 in 1” detachables rather than straight-up Windows 10 tablets, there are arguably few compelling reasons for app developers to support UWPs, unless they feel a particular need to also target relatively niche devices like HoloLens, Surface Hub and Xbox.

Devs could turn to an app framework like Xamarin, which would let them support multiple device types and OSes, generating UWP apps alongside their Android and iOS counterparts.

When the vast majority of their addressable market is someone sitting in front of a PC, not a phone, if you’re an app developer who already supports Windows, then it might be easier to wrap your existing PC app using the Desktop Bridge, allowing for distribution through the Store but without needing to completely rewrite the app as a UWP one, as both Spotify and Amazon Music have shown.

One tell-tale of an app that’s probably been packaged with the Desktop Bridge, is that if you look at it in the Store, you’ll see that it’s available on PC only.

The latest chapter in the Store story, though, is that of PWAs, or Progressive Web Apps.

In a nutshell, PWAs are web sites built to behave more like dedicated mobile apps, with features like caching, notifications & more, so a mobile version of an existing web site could obviate the need for building an app as well. Developers could build a specific app for the remaining mobile platforms (natively, or with frameworks like Xamarin or – check out this excellent intro – Google’s Flutter), alternatively they just put their efforts into a PWA, which can run on any modern browser, mobile or otherwise. There’s a lot of love for PWAs in some quarters of the mobile developer world.

It’s still a relatively new frontier, but there are already various collections of PWA apps that can be quickly sampled.

As highlighted by Windows Central, PWAs are now appearing in the Microsoft Store, potentially giving top tier app developers a way of supporting Windows, even if they haven’t decided to specifically build a dedicated Windows app.

To quickly find the list of all Microsoft-published apps, start with Skyscanner, and you’ll see the publisher is “Microsoft Store” itself – scroll down to the Additional information, click on that link and you’ll find the others that have been published at the same time. Or search the web.

Of course, publishers may well choose to proactively put their own apps into the Store, or if they publish PWAs elsewhere, then the best of them may get hoovered up and added to the Microsoft Store on their behalf.

Tip o’ the Week 418 – Preview Apps on Windows 10

Posted on February 16, 2018 by ewand

The Insider Program for Windows 10 is one of the largest public beta program in software development history with over 10m active users. There are various options for how much on the bleeding edge you’d like to be (eg how much pain are you prepared to tolerate, in order to get to play with stuff long before everyone else?) – and the “hit me baby” version, called Skip Ahead, is already now testing the next update to Windows (RS5) that will come after the one that’s due for release in the spring (RS4), which is still in the rest of the test branches. Capiche?

Way down in the text of the latest announcement, there’s mention of a new “App Preview” program which lets the quick & the brave get access to cool but maybe unfinished updates to Apps they like, but maybe aren’t as dependent on, as the stability of the whole operating system.

The first wave of apps that are Preview-enabled, will let more cautious Insiders experience the latest versions of …

Feedback Hub
Microsoft Photos
Microsoft Sticky Notes
Viewer

Microsoft Tips
Paint 3D
Windows Alarms & Clock
Windows Voice Recorder

Windows Calculator
Windows Camera
Windows Mixed Reality

… by opting in, through going into the Settings within the appropriate app and choosing to join the fun. The app will update in the background, and may change the app title & version number…

There are regular updates to the core apps for every Windows user, not running an Insider build. If you’d like to check, just go into the Store, activate the “…” ellipsis on the top right, and choose Downloads and updates, and review the list to see what apps have been updated and when, or hit “Get updates” to check for published updates to other apps.

The Photos app has a new opt-in feature, in conjunction with a test app that is designed to make it easy to share Photos from a phone to a PC; even if you’re not running an Insider build, you can turn on the mobile import…

The “Photos Companion” test app makes a point-to-point connection between phone & PC (ie they need to both be on the same network), and by going to the Import menu within the PC Photo app, a QR code will be displayed on-screen.

Start the app on your phone, point at the QR code and you’ll quickly be able to send the selected photos from phone to PC.

Of course, you could use OneDrive on your mobile device to automatically sync photos to a Camera Roll folder in your cloud storage location; it has a bit of latency, usually, so you might find it takes a few minutes before the photo you’ve just taken has uploaded and is ready to be accessed or shared.

The Import over WiFi feature is handy to share right away, or to share with PCs that aren’t set up with your OneDrive, such as a friend’s PC, or if you’re working on a project where you want to collect photos from a group of people in a short space of time – maybe doing a collaborative video or something similar?