If you’re a car-owning Android phone user, it’s worth looking into the Android Auto ecosystem. At a high level, Android Auto is like Apple CarPlay – a way of projecting apps from your phone to a screen in your car, and interacting with them through the car’s own UI – be that touch, buttons or speech. Some cars will allow your phone to connect wirelessly, while others may require it to be plugged in.
If you have an older car – or you didn’t fork out on the options list to add CarPlay/Android Auto to your more recent one (like the £3K option price on a £170K Ferrari) – it’s still possible to run Android Auto on your phone while in the car.
The main Android Auto app can either be run manually or set to start automatically when the phone connects to your car’s Bluetooth system.
The app displays a simplified arms-reach or voice-driven UI, showing navigation, telephone and music apps, and the settings allow for a good amount of choice – Waze or Google Maps, Spotify or Amazon Music etc.
Assuming you’re going to cradle it, you’d treat it like you might use a fitted satnav system – albeit one which uses the phone’s network to show real-time traffic news, updates maps dynamically and freely rather than the eye-watering prices to update software and maps on installed systems.
There are 120-odd Android Auto compatible apps, so even if you don’t see their UI on the main menu, you could respond (with voice) to incoming messages on WhatsApp, or choose to listen to podcasts with Stitcher as one of several interchangeable “music” apps.
If your car does support Android Auto (check compatibility here) then it might take a bit of experimenting to understand how to connect it and how to get the car’s display to show the app outputs, though the results are largely the same as what you’d see if you just ran the host Android Auto app on your phone screen directly.
You might be able to replace the satnav system in an older car with one which does support Android Auto – see here for some ideas – as aftermarket satnavs are increasingly simple, ditching a CD/DVD player and maybe not even having a radio tuner – perhaps all you need in your car stereo is a 7” screen to which your phone connects, and an amplifier. Some retro-fit satnav systems use Android as their own OS, and offer a whole host of Carlos Fandango features for little more than the cost of a maps update for an older in-car system.
Month: October 2020
552 – snip snip, cap cap
It was announced a couple of years ago that the old Snipping Tool that was part of Windows was to be retired – in fact, it’s still there (following lots of user feedback, akin to the Save the Blibbet campaign) but its successor – the Snip & Sketch app – offers more functionality and is included with current versions of Windows 10. Invoking it with the WindowsKey+SHIFT+S is the quickest and simplest way to grab some or all of the screen, and if necessary, draw or annotate on it, save it as an image file and so on.
There are other screen capturing tools, of course – OneNote had a precursor feature which could be used to do much the same as Snip & Sketch, and even used the same shortcut key. OneNote makes such a great destination for screen grabs that the Clipping option is still there in the trad. version, and of course both variants can be the destination for something that’s been grabbed to the clipboard using Snip & Sketch.
There’s also the super-handy OneNote Web Clipper browser extension, which lets you grab web pages to add to your notebook with a couple of clicks.
Now the Edge browser is going to add some web capture capabilities natively – currently in testing and rolling out to a subset of Insiders, there will be a new menu option to grab a section of a page, including the ability to scroll down the page while capturing (rather than just grabbing what’s on the screen).
Eventually, the new Edge will adopt some of the functionality that legacy Edge had when it comes to annotating web pages with ink, adding notes to pages etc – but the forthcoming web capture is a first step. Note – if you use Mouse Without Borders, it already has the CTRL+SHIFT+S keyboard combo in use, so you’ll need to change that…
551 – Ticking away the moments
Keeping track of time is ever-present in our normal working lives, all the more so during These Difficult Times™, and the subject has featured in many ToW’s passim.
There’s a great little app built-in to Windows 10 called Alarms & Clock, which lets you set alarms on your PC, show a world map with multiple locations / time zones displayed, and also provides a neat countdown or count-up timer.
Using the timer function can be pretty handy if you’re speaking as part of an online meeting, and need to keep a check on how long you have left to go.
You can create multiple separately-controlled timers with different durations & names; so you could have an overall meeting countdown timer, and then a separate one for each participant, if you were acting as the time cop to keep everyone else in line.
The Stopwatch is simply a fast-running counter of elapsed time, and by using the icon on either Timer or Stopwatch screens, you can easily fill the display to help focus on the elapsed or remaining time. Handy if you’re in a physical meeting (remember them?) and are able to display a laptop screen showing the time for everyone.
Those of us who still wear physical, mechanical wristwatches may be passingly familiar with a few features that have existed for decades to achieve the same kind of function, albeit more for individual rather than shared use.
So called “diver” watches were popularised in the 1960s and 70s, as tough, waterproof and utilitarian. The most striking feature of any dive watch is generally the rotating numbered bezel which goes around the outside.
The simple idea was that when you entered the water (knowing you might have 20 minutes of air), you would turn the bezel so the arrow / zero marker was set to where the minute hand was at that point – meaning a later glance at the watch will tell you how many minutes have passed since.
Lots of other non-dive watches also have rotating bezels or indicators, and can be useful for things other than scuba – when the activity above started at 5 minutes to 10, the bezel was set, and it’s easy to see in a trice that was 11 or 12 minutes ago. Not sub-second accurate, but it’s a simple way to mark the passing of time.
Many chronograph watches – which combine the function of a stopwatch and a regular timepiece – have a Tachymetre scale around the outside, yet most people these days will have no clue what it’s for. The basic function of the watch is that pusher buttons on the side will start and stop the movement of the chronograph hand which ticks round to indicate elapsed time.
The deal with the TACHY scale is that if you know a distance – the length of a straight on a motor-racing track, for example – and you time something going over that distance, then you can quickly calculate its speed across the ground.
In practice this is easier said than done, since the TACHY scale reads how many of the <distance> would be covered in an hour at this speed. If the measured distance was exactly 1km or 1mile then it’s an easy calculation – if it took 12 seconds to cover 1km, that would equate to 5km per minute or 300km/h. If the measured distance was a fraction – let’s say the length of the 12-second straight was 150m – then the calculation would be 300 x 150m per hour, or 45km/h. By the time you’ve done that in your head, the subject will be half a lap further on…
Another variant on the theme would be if you know the speed – e.g. you’re in a plane with inflight map display, or passenger in a car on cruise control on the motorway – then you could use the Tachymeter to calculate distance travelled.
If you were cruising at 120km/h, and started the timer, then stopped it when it reached 120 on the scale… (after 30 seconds) – then you know you will have travelled 1km in that time.
Yes, there probably are hundreds of times a month when you need to know exactly this.
Slightly more useful to the average person, some chronographs have a Pulsations bezel rather than a Tachymeter scale, or maybe even have both (since the Tachymeter would typically be used for more than 15 seconds, it’s possible to have one quarter of the bezel represent pulsations and the rest of it be a Tachy).
Watches with Pulsations bezels are sometimes nicknamed “Doctors’ watches” as the utility is to help count a patient’s pulse – the method being you start the chronograph, count 15 pulses and the corresponding number on the bezel would tell you what the pulse/minute rate is.
Smart watches, eh, who needs them when you have space-age timing technology like this?
550 – That’s not my name
If you have the kind of name that people habitually get wrong, there are things you can do to mitigate, like adopting a shorter and easier-to-pronounce and/or spell version. This tactic is often seen where people from cultures with long and complex names choose a “western” handle as well, just to make their own lives a bit easier. Or you could just put up with people getting your name wrong and don’t worry about it.
An alternative trick is to provide people with your own pronunciation – that way, even if they forget, they can go back and check how you say your name. In the days of Microsoft Exchange Unified Messaging, you could choose to record your own name, as well as calling in to set your voicemail greeting, manage your calendar and so on. Exchange UM made a great demo back in the day, but presumably didn’t get used enough as it has now gone away.
If your organization used UM and you’d bothered to record your name, then you may still see a greyed-looking loudspeaker icon next to yours or others’ names in the Outlook address book. Click on that to play – if it’s not there, too bad (probably).
A possibly more useful way of spreading your preferred pronunciation is to use LinkedIn – if you record your own name, it’ll show up on your profile and you can make it so public that anyone in the world can play it. To make the recording, you’ll need to use the LinkedIn mobile app.
Tap on your own photo in the top left of the LinkedIn app, then choose View Profile – and the rest is fairly self-explanatory. You record your name, and after you’ve confirmed that you’re happy with the playback, save it and from now on, anyone who looks you up will see the speaker icon next to your profile name.
Alternatively, YouTube has a variety of pronunciation tutorials.
549 – Quick & easy screen recording
There are other more accessible and arguably easier ways for the modern PC user to capture the screen, though. You could start a Teams meeting with yourself (a handy way to check how you look and sound on video) by going to the Calendar node in Microsoft Teams and click Meet now. Once you’re in the meeting with only yourself, you can share your desktop or an app in the usual way, and record the “meeting” for later enjoyment.
Depending on how your Teams/M365 environment is set up, your recording may be stored on OneDrive or SharePoint (as opposed to being automatically uploaded to Microsoft Stream – a new change that was announced at Ignite), but one way or another you can download the MP4 recording to a file, and share it more widely.
A simpler method might be to just go to the Stream portal – if you’re a subscriber to Microsoft 365 – and create a screen recording from there.
If you’re not looking for anything too fancy, though, a quick & easy way to grab a recording of an application – not the whole screen, only the current app window – is to use the Xbox Game Bar that’s probably included in your Windows 10 install.
Although the Game Bar is designed to be used for recording snippets of gameplay, it’s also a really neat way of capturing the video and audio of pretty much any other application; with a bit of practice, you could record your own instructions on how to carry out some task in an application, while showing just that app window, and it’ll be available to share in a few moments.
Simply open the app you want to record, then press WindowsKey+G to bring up the overlay GameBar UI.
Click the floating toolbar along the top to show or hide various docked windows which will appear on the left side; if you want to record a commentary over the top of your screen capture, then click the settings cog at the far right of the toolbar and set the option to record system audio as well.
When you’re ready, press the round record button in the Capture dialog (or press WindowsKey+ALT+R), also making sure your mic isn’t muted if you want to record your voice. Once you’re live, you’ll see another floating toolbar that lets you mute your mic and stop the recording, and when complete, it’ll show a confirmation that the recording is done – click on that notification to go straight to the folder where the recordings are held.
To find or set the capture location, or to tweak settings like the video frame rate and quality, just press WindowsKey and start typing Capture to jump to the settings page.
The captures generated are full-fidelity, so on a large screen monitor, sizes can be pretty big.
A 1m30s demo captured on a 4K display could easily be 200Mb in size; a quick solution is to use the built-in Video Editor in the Photos app.
Just open the Editor and create a new project, add the huge video capture file, drag it to the Timeline then hit Finish video to save an encoded version at a lower quality – for rough screen caps, Medium (1280×720) is probably good enough, and drops from 130+ MB/minute to more like 5MB/min.